세계의 선회 베어링 시장 : 유형별, 용도별, 설계별, 지역별 - 산업 분석, 시장 규모, 시장 점유율 및 예측(2024-2032년)

REPORT HIGHLIGHT

The market for Slewing Bearing was projected to reach USD 4,351.6 million in 2023 and expand at a CAGR of 6.50% between 2024 - 2032.

Slewing bearings are composed of inner and outer rings that are mostly used to sustain the massive yet slowly rotating loads of swing yarders and conventional crawler cranes. Excavators and aerial platform vehicles can also be used for a variety of purposes. In the sphere of rolling bearing technology, slewing bearings are also recognizable items. Thin-section slewing bearings are primarily well-known in the diameter range of 800 to 7,500 mm. The axial moment of loads and tilting radially may be dependable and supported by this bearing. The primary components of slewing bearings are two rows of rolling elements, such as inner ring "halves" and two outer rings, and three race elements that clamp together axially.

Slewing Bearing Market- Market Dynamics

Growing Use of Slewing Bearings in Offshore Wind Farms

The last few years have seen a large global investment by businesses in the construction of offshore wind farms. By 2019, offshore wind farms accounted for more than 10% of the world's installed capacity, up from 1% in 2009. In 2019, there was an addition of about 6.0 GW of new offshore wind capacity; the majority of this was located in China, accounting for nearly 37% of the total; the U.K. (29%) and Germany (18%) saw the most of the development in capacity. The offshore market is expected to grow dramatically over the next three decades, according to the International Renewable Energy Agency (IRENA). From barely 29 GW in 2019 to 228 GW in 2030 and over 1,000 GW in 2050, the installed offshore wind capacity will have increased by nearly ten times. By 2050, offshore wind is predicted to account for over 17% of the world's 6,044 GW installed wind capacity. Therefore, it is anticipated that the growth of offshore wind farms will soon boost the wind turbine slewing bearing market. In a wind farm, slewing bearings enable the necessary oscillation to regulate the wind turbine's power and load. The slewing bearing market for wind turbines is expanding due in large part to this application of slewing bearing in wind farms.

Slewing Bearing Market- Key Insights

According to our research analyst's analysis, the global market is projected to expand at a CAGR of approximately 6.50% during the forecast period of 2024-2032.

The internal gear type category was projected to have the largest market share based on type segmentation in 2023.

The cross roller category emerged as the top segment based on application segmentation in 2023.

Asia Pacific held the largest revenue share by region in 2023.

Slewing Bearing Market- Segmentation Analysis:

The Global Slewing Bearing Market is segmented into Type, Application, Design, and Region.

On the basis of type, the market is segmented into Non-Gear Type, External Gear Type, and Internal Gear Type. With the highest compound annual growth rate, internal gear type category is predicted to provide a sizable amount of revenue over the estimated time frame. The performance of pitch and turbine control can be improved, and friction can be reduced by using an internal gear-type slewing bearing. Moreover, the decreased friction of these bearings contributes to the production of more energy. These bearings also have cheap running and maintenance expenses. Furthermore, it is anticipated that longer seal and bearing service lives, enhanced turbine dependability, and better pitch control would boost the expansion of the worldwide slewing bearings market.

The market is divided into Radar, Construction, Mining, Wind Turbines (Onshore, Offshore), and Others, based on design. It is anticipated to have notable expansion in the wind turbine segment, owing to the growing demand for sustainable energy sources and the requirement for wind turbines that are dependable and efficient. In order to monitor the direction of the wind and rotate the blades, which is essential for producing electricity, wind turbines require slewing bearings. Slewing bearing demand is fueled by the rising demand for wind energy and the corresponding need for more dependable and efficient wind turbines. This market is expanding because slewing bearings have become more resilient, effective, and affordable as a result of technological and material improvements.

Slewing Bearing Market- Geographical Insights

The Slewing Bearing market is widely distributed geographically in North America, Europe, Asia Pacific, Latin America, the Middle East and Africa. These areas are further separated based on the countries that provide business.

Over the forecast period, the Asia Pacific Slewing Bearings market is expected to grow at a phenomenal rate in the global market. Well-known businesses that operate in this sector, like Kaydon Bearings, an SKF Group Company, have strengthened their presence in these areas through a number of strategic initiatives. Furthermore, slewing bearings play a significant part in applications like wind power and building projects. As a result, it is anticipated that growing project activity in Asian nations like China, India, and South Korea will increase demand for slewing bearings in the region. For instance, China's wind power capacity expanded by 22 times in 2018, according to studies done by the International Renewable Energy Agency (IRENA).

With its well-established industrial base, strict regulatory frameworks, and increased emphasis on sustainability and renewable energy, Europe is another important market for slewing bearings. European slewing bearing producers use their sophisticated engineering know-how, business alliances, and R&D expenditures to create cutting-edge products for a wide range of industrial uses, propelling their industry's expansion and competitiveness on a worldwide level. Strong demand for slewing bearings is also driven by the region's developing mining, construction, and renewable energy industries. As a result, both local and foreign manufacturers have increased their production capacities, improved their product offerings, and formed strategic alliances in order to take advantage of these growth opportunities.

Slewing Bearing Market- Competitive Landscape:

Among the major companies in the Slewing Bearings market are WaFangDian Rolling Bearing Manufacturing CO., LTD., Universal Industrial Products, NSK Ltd., THE TIMKEN COMPANY, and Thyssenkrupp Rothe Erdde Germany GmbH. To enter local markets, market players typically choose inorganic expansion techniques. Top firms use strategies like product development, mergers and acquisitions, technological adoption, partnerships, joint ventures, and collaborations to strengthen their market positions in the worldwide slewing bearings business.

Recent Developments:

October 2022: The first smart energy and carbon management system was constructed at SKF's Dalian factory in China in collaboration with Goldwind, a Chinese wind turbine manufacturer, as part of a bigger sustainability-focused commitment. Additionally, to further enhance sustainability and support intelligent, green wind power, SKF and Goldwind are anticipated to collaborate on models for bearing operation and maintenance diagnosis, encourage the use of intelligent rollers in test development, and advance digital collaboration.

May 2021: Schaeffler AG inaugurated a 22,000-square-meter plant in Jiangsu Province, Eastern China, to increase the company's capacity to produce wind energy. The major focus of the Nanjing site is the production of large-size bearings with a diameter of more than 800 millimeters, which are commonly used in wind turbines, gearboxes, and heavy industry.

September 2022: To improve its competitiveness and manufacturing capacity in North America, SKF Group invested about US$ 50 million. In its manufacturing site in Sumter, South Carolina, the company is investing about US$ 28 million to expand and automate manufacturing processes.

SCOPE OF THE REPORT

The scope of this report covers the Slewing Bearing market by its major segments, which include as follows:

GLOBAL SLEWING BEARING MARKET KEY PLAYERS- DETAILED COMPETITIVE INSIGHTS

• Schaeffler India Limited
• Thyssenkrupp rothe erde Germany GmbH
• NSK Ltd.
• WaFangDian Rolling Bearing Manufacturing CO., LTD.
• LA LEONESSA SpA
• Universal Industrial Products
• THE TIMKEN COMPANY
• Zhejiang Tianma Bearing Group Co., Ltd.
• Antex corp
• Xuzhou Helin Slewing Bearing Co., Ltd.
• Others

GLOBAL SLEWING BEARING MARKET, BY TYPE- MARKET ANALYSIS, 2019 - 2032

• Non-Gear Type
• External Gear Type
• Internal Gear Type

GLOBAL SLEWING BEARING MARKET, BY APPLICATION- MARKET ANALYSIS, 2019 - 2032

• Cross Roller
• Bi-Angular Roller or Taper
• Double-Row Ball
• Three-Row Roller
• Single-row Four Point Contact Ball
• Four and Eight Point Contact Ball
• Others

GLOBAL SLEWING BEARING MARKET, BY DESIGN- MARKET ANALYSIS, 2019 - 2032

• Radar
• Construction
• Mining
• Wind Turbines
• Onshore
• Offshore
• Others

GLOBAL SLEWING BEARING MARKET, BY REGION- MARKET ANALYSIS, 2019 - 2032

• North America
• The U.S.
• Canada
• Europe
• Germany
• France
• Italy
• Spain
• United Kingdom
• Russia
• Netherlands
• Sweden
• Poland
• Rest of Europe
• Asia Pacific
• India
• China
• South Korea
• Japan
• Australia
• Thailand
• Indonesia
• Philippines
• Rest of APAC
• Latin America
• Brazil
• Mexico
• Argentina
• Colombia
• Rest of LATAM
• The Middle East and Africa
• Saudi Arabia
• United Arab Emirates
• Israel
• Turkey
• Algeria
• Egypt
• Rest of MEA

Table of Contents

1. Slewing Bearing Market Overview

• 1.1. Study Scope
• 1.2. Market Estimation Years

2. Executive Summary

• 2.1. Market Snippet
  • 2.1.1. Slewing Bearing Market Snippet by Type
  • 2.1.2. Slewing Bearing Market Snippet by Application
  • 2.1.3. Slewing Bearing Market Snippet by Design
  • 2.1.4. Slewing Bearing Market Snippet by Country
  • 2.1.5. Slewing Bearing Market Snippet by Region
• 2.2. Competitive Insights

3. Slewing Bearing Key Market Trends

• 3.1. Slewing Bearing Market Drivers
  • 3.1.1. Impact Analysis of Market Drivers
• 3.2. Slewing Bearing Market Restraints
  • 3.2.1. Impact Analysis of Market Restraints
• 3.3. Slewing Bearing Market Opportunities
• 3.4. Slewing Bearing Market Future Trends

4. Slewing Bearing Industry Study

• 4.1. PEST Analysis
• 4.2. Porter's Five Forces Analysis
• 4.3. Growth Prospect Mapping
• 4.4. Regulatory Framework Analysis

5. Slewing Bearing Market: COVID-19 Impact Analysis

• 5.1. Pre-COVID-19 Impact Analysis
• 5.2. Post-COVID-19 Impact Analysis
  • 5.2.1. Top Performing Segments
  • 5.2.2. Marginal Growth Segments
  • 5.2.3. Top Looser Segments
  • 5.2.4. Marginal Loss Segments

6. Slewing Bearing Market Landscape

• 6.1. Slewing Bearing Market Share Analysis, 2023
• 6.2. Breakdown Data, by Key Manufacturer
  • 6.2.1. Established Players' Analysis
  • 6.2.2. Emerging Players' Analysis

7. Slewing Bearing Market - By Type

• 7.1. Overview
  • 7.1.1. Segment Share Analysis, By Type, 2023 & 2032 (%)
  • 7.1.2. Non-Gear Type
  • 7.1.3. External Gear Type
  • 7.1.4. Internal Gear Type

8. Slewing Bearing Market - By Application

• 8.1. Overview
  • 8.1.1. Segment Share Analysis, By Application, 2023 & 2032 (%)
  • 8.1.2. Cross Roller
  • 8.1.3. Bi-Angular Roller or Taper
  • 8.1.4. Double-Row Ball
  • 8.1.5. Three-Row Roller
  • 8.1.6. Single-row Four Point Contact Ball
  • 8.1.7. Four and Eight Point Contact Ball
  • 8.1.8. Others

9. Slewing Bearing Market - By Design

• 9.1. Overview
  • 9.1.1. Segment Share Analysis, By Design, 2023 & 2032 (%)
  • 9.1.2. Radar
  • 9.1.3. Construction
  • 9.1.4. Mining
  • 9.1.5. Wind Turbines
    • 9.1.5.1. Onshore
    • 9.1.5.2. Offshore
  • 9.1.6. Others

10. Slewing Bearing Market- By Geography

• 10.1. Introduction
  • 10.1.1. Segment Share Analysis, By Geography, 2023 & 2032 (%)
• 10.2. North America
  • 10.2.1. Overview
  • 10.2.2. Slewing Bearing Key Manufacturers in North America
  • 10.2.3. North America Market Size and Forecast, By Country, 2019 - 2032 (US$ Million)
  • 10.2.4. North America Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
  • 10.2.5. North America Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
  • 10.2.6. North America Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.2.7. U.S.
    • 10.2.7.1. Overview
    • 10.2.7.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.2.7.3. U.S. Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.2.7.4. U.S. Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.2.7.5. U.S. Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.2.8. Canada
    • 10.2.8.1. Overview
    • 10.2.8.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.2.8.3. Canada Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.2.8.4. Canada Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.2.8.5. Canada Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
• 10.3. Europe
  • 10.3.1. Overview
  • 10.3.2. Slewing Bearing Key Manufacturers in Europe
  • 10.3.3. Europe Market Size and Forecast, By Country, 2019 - 2032 (US$ Million)
  • 10.3.4. Europe Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
  • 10.3.5. Europe Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
  • 10.3.6. Europe Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.3.7. Germany
    • 10.3.7.1. Overview
    • 10.3.7.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.3.7.3. Germany Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.3.7.4. Germany Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.3.7.5. Germany Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.3.8. Italy
    • 10.3.8.1. Overview
    • 10.3.8.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.3.8.3. Italy Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.3.8.4. Italy Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.3.8.5. Italy Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.3.9. United Kingdom
    • 10.3.9.1. Overview
    • 10.3.9.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.3.9.3. United Kingdom Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.3.9.4. United Kingdom Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.3.9.5. United Kingdom Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.3.10. France
    • 10.3.10.1. Overview
    • 10.3.10.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.3.10.3. France Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.3.10.4. France Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.3.10.5. France Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.3.11. Russia
    • 10.3.11.1. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.3.11.2. Russia Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.3.11.3. Russia Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.3.11.4. Russia Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.3.12. Netherlands
    • 10.3.12.1. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.3.12.2. Netherlands Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.3.12.3. Netherlands Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.3.12.4. Netherlands Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.3.13. Sweden
    • 10.3.13.1. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.3.13.2. Sweden Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.3.13.3. Sweden Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.3.13.4. Sweden Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.3.14. Poland
    • 10.3.14.1. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.3.14.2. Poland Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.3.14.3. Poland Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.3.14.4. Poland Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.3.15. Rest of Europe
    • 10.3.15.1. Overview
    • 10.3.15.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.3.15.3. Rest of the Europe Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.3.15.4. Rest of the Europe Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.3.15.5. Rest of the Europe Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
• 10.4. Asia Pacific (APAC)
  • 10.4.1. Overview
  • 10.4.2. Slewing Bearing Key Manufacturers in Asia Pacific
  • 10.4.3. Asia Pacific Market Size and Forecast, By Country, 2019 - 2032 (US$ Million)
  • 10.4.4. Asia Pacific Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
  • 10.4.5. Asia Pacific Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
  • 10.4.6. Asia Pacific Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.4.7. India
    • 10.4.7.1. Overview
    • 10.4.7.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.4.7.3. India Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.4.7.4. India Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.4.7.5. India Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.4.8. China
    • 10.4.8.1. Overview
    • 10.4.8.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.4.8.3. China Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.4.8.4. China Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.4.8.5. China Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.4.9. Japan
    • 10.4.9.1. Overview
    • 10.4.9.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.4.9.3. Japan Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.4.9.4. Japan Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.4.9.5. Japan Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.4.10. South Korea
    • 10.4.10.1. Overview
    • 10.4.10.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.4.10.3. South Korea Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.4.10.4. South Korea Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.4.10.5. South Korea Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.4.11. Australia
    • 10.4.11.1. Overview
    • 10.4.11.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.4.11.3. Australia Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.4.11.4. Australia Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.4.11.5. Australia Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.4.12. Thailand
    • 10.4.12.1. Overview
    • 10.4.12.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.4.12.3. Thailand Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.4.12.4. Thailand Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.4.12.5. Thailand Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.4.13. Indonesia
    • 10.4.13.1. Overview
    • 10.4.13.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.4.13.3. Indonesia Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.4.13.4. Indonesia Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.4.13.5. Indonesia Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.4.14. Philippines
    • 10.4.14.1. Overview
    • 10.4.14.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.4.14.3. Philippines Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.4.14.4. Philippines Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.4.14.5. Philippines Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.4.15. Rest of APAC
    • 10.4.15.1. Overview
    • 10.4.15.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.4.15.3. Rest of APAC Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.4.15.4. Rest of APAC Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.4.15.5. Rest of APAC Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
• 10.5. Latin America
  • 10.5.1. Overview
  • 10.5.2. Slewing Bearing Key Manufacturers in Latin America
  • 10.5.3. Latin America Market Size and Forecast, By Country, 2019 - 2032 (US$ Million)
  • 10.5.4. Latin America Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
  • 10.5.5. Latin America Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
  • 10.5.6. Latin America Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.5.7. Brazil
    • 10.5.7.1. Overview
    • 10.5.7.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.5.7.3. Brazil Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.5.7.4. Brazil Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.5.7.5. Brazil Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.5.8. Mexico
    • 10.5.8.1. Overview
    • 10.5.8.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.5.8.3. Mexico Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.5.8.4. Mexico Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.5.8.5. Mexico Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.5.9. Argentina
    • 10.5.9.1. Overview
    • 10.5.9.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.5.9.3. Argentina Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.5.9.4. Argentina Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.5.9.5. Argentina Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.5.10. Colombia
    • 10.5.10.1. Overview
    • 10.5.10.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.5.10.3. Colombia Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.5.10.4. Colombia Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.5.10.5. Colombia Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.5.11. Rest of LATAM
    • 10.5.11.1. Overview
    • 10.5.11.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.5.11.3. Rest of LATAM Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.5.11.4. Rest of LATAM Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.5.11.5. Rest of LATAM Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
• 10.6. Middle East and Africa
  • 10.6.1. Overview
  • 10.6.2. Slewing Bearing Key Manufacturers in Middle East and Africa
  • 10.6.3. Middle East and Africa Market Size and Forecast, By Country, 2019 - 2032 (US$ Million)
  • 10.6.4. Middle East and Africa Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
  • 10.6.5. Middle East and Africa Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
  • 10.6.6. Middle East and Africa Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.6.7. Saudi Arabia
    • 10.6.7.1. Overview
    • 10.6.7.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.6.7.3. Saudi Arabia Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.6.7.4. Saudi Arabia Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.6.7.5. Saudi Arabia Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.6.8. United Arab Emirates
    • 10.6.8.1. Overview
    • 10.6.8.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.6.8.3. United Arab Emirates Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.6.8.4. United Arab Emirates Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.6.8.5. United Arab Emirates Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.6.9. Israel
    • 10.6.9.1. Overview
    • 10.6.9.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.6.9.3. Israel Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.6.9.4. Israel Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.6.9.5. Israel Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.6.10. Turkey
    • 10.6.10.1. Overview
    • 10.6.10.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.6.10.3. Turkey Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.6.10.4. Turkey Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.6.10.5. Turkey Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.6.11. Algeria
    • 10.6.11.1. Overview
    • 10.6.11.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.6.11.3. Algeria Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.6.11.4. Algeria Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.6.11.5. Algeria Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.6.12. Egypt
    • 10.6.12.1. Overview
    • 10.6.12.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.6.12.3. Egypt Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.6.12.4. Egypt Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.6.12.5. Egypt Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)
  • 10.6.13. Rest of MEA
    • 10.6.13.1. Overview
    • 10.6.13.2. Market Analysis, Forecast, and Y-O-Y Growth Rate, 2019 - 2032, (US$ Million)
    • 10.6.13.3. Rest of MEA Market Size and Forecast, By Type, 2019 - 2032 (US$ Million)
    • 10.6.13.4. Rest of MEA Market Size and Forecast, By Application, 2019 - 2032 (US$ Million)
    • 10.6.13.5. Rest of MEA Market Size and Forecast, By Design, 2019 - 2032 (US$ Million)

11. Key Vendor Analysis- Slewing Bearing Industry

• 11.1. Competitive Dashboard
• 11.2. Company Profiles
  • 11.2.1. Schaeffler India Limited
  • 11.2.2. Thyssenkrupp rothe erde Germany GmbH
  • 11.2.3. NSK Ltd.
  • 11.2.4. WaFangDian Rolling Bearing Manufacturing CO., LTD.
  • 11.2.5. LA LEONESSA SpA
  • 11.2.6. Universal Industrial Products
  • 11.2.7. THE TIMKEN COMPANY
  • 11.2.8. Zhejiang Tianma Bearing Group Co., Ltd.
  • 11.2.9. Antex corp
  • 11.2.10. Xuzhou Helin Slewing Bearing Co., Ltd.
  • 11.2.11. Others

12. 360 Degree Analyst View

13. Appendix

• 13.1. Research Methodology
• 13.2. References
• 13.3. Abbreviations
• 13.4. Disclaimer
• 13.5. Contact Us