콘크리트 플랜트 장비 시장 기회, 성장 촉진요인, 산업 동향 분석 및 예측(2025-2034년)

The Global Concrete Plant Equipment Market was valued at USD 5.1 billion in 2024 and is estimated to grow at a CAGR of 3.5% to reach USD 7.2 billion by 2034. This growth is being propelled by rapid urban development, increasing infrastructure investment, and surging demand for high-quality ready-mix concrete across the globe. Governments are allocating large budgets toward public works, including transportation, commercial developments, and utility projects. As the construction industry shifts toward efficiency and innovation, concrete batching plants are evolving with advanced features, including smart automation and digital integration. Environmental concerns and regulatory frameworks are influencing the development of eco-efficient equipment that optimizes resource usage and minimizes waste.

Companies are prioritizing greener, smarter solutions, aligning with global initiatives to reduce emissions. Rising demand from emerging economies, automation across job sites, and the widespread adoption of Internet of Things (IoT)-enabled systems are helping reshape the market. A push for digitalization is driving higher operational accuracy, energy savings, and productivity. The industry is witnessing a shift toward sustainable and intelligent batching plants, which are being tailored to meet the unique needs of massive construction ventures while maintaining environmental compliance.

The stationary batching plants segment held 64.5% share in 2024 due to their high efficiency and superior output capacities. These plants are particularly well-suited for large-scale infrastructure and commercial development projects. They can handle batching capacities from 30 up to over 150 cubic meters per hour, offering a performance advantage over compact and mobile units. Their stable design supports seamless integration with digital control systems and automation software, which helps reduce human errors by 20% to 30% and significantly boosts production efficiency. Although their initial investment is higher, the benefits in terms of energy savings, long-term cost reduction, and production consistency make stationary plants a preferred option for continuous, large-scale use.

In 2024, the infrastructure projects segment held 46.2% share and is forecasted to grow at a CAGR of 3.7% through 2034. Infrastructure remains the most demanding sector for concrete batching equipment, given its reliance on high volumes of durable, precision-mixed concrete. These projects often require batching plants with a minimum capacity of 100 cubic meters per hour to keep up with continuous concrete consumption. Such projects include roads, railways, runways, bridges, and other public works. Stationary batching plants are favored here due to their ability to maintain consistent output over extended periods, reduce quality defects by up to 30%, and limit project delays.

U.S. Concrete Plant Equipment Market held 68.9% share, generating USD 1 billion in 2024. The country continues to lead the regional market, supported by a mature infrastructure framework and high levels of public and private investment in construction. Ongoing improvements in highways, airports, bridges, and commercial complexes keep demand strong for advanced batching machinery. US builders increasingly rely on digital technologies and smart systems to optimize plant operations and ensure superior concrete quality. Additionally, the strict regulatory landscape pushes manufacturers and contractors to adopt equipment that meets safety and environmental performance benchmarks.

Major players shaping the competitive landscape of the Global Concrete Plant Equipment Market include Sany, Meka, Fangyuan, Janeoo, Zoomlion, RexCon, XCMG, Elkon, Ammann, Lintec, CON-E-CO, Liebherr, McCrory Engineering, Schwing Stetter, and Putzmeister. Leading companies in the concrete plant equipment space are aggressively focusing on expanding their global presence through strategic partnerships and localized manufacturing. Many firms are enhancing their portfolios by integrating digital controls, AI-based monitoring, and IoT-enabled solutions into their batching plants. This helps end-users monitor production remotely and ensure batch accuracy. Companies are also developing eco-friendly models that incorporate water recycling systems, dust suppression units, and low-emission mixers to comply with tightening environmental standards.

Table of Contents

Chapter 1 Methodology and Scope

• 1.1 Market scope and definition
• 1.2 Research design
  • 1.2.1 Research approach
• 1.3 Data collection methods
• 1.4 Data mining sources
  • 1.4.1 Global
  • 1.4.2 Regional/Country
• 1.5 Base estimates and calculations
  • 1.5.1 Base year calculation
  • 1.5.2 Key trends for market estimation
• 1.6 Primary research and validation
  • 1.6.1 Primary sources
• 1.7 Forecast model
• 1.8 Research assumptions and limitations

Chapter 2 Executive Summary

• 2.1 Industry 360⁰ synopsis
• 2.2 Key market trends
  • 2.2.1 Regional
  • 2.2.2 Plant Type
  • 2.2.3 Capacity
  • 2.2.4 Automation Level
  • 2.2.5 Application
  • 2.2.6 End use
• 2.3 CXO perspectives: Strategic imperatives
  • 2.3.1 Key decision points for industry executives
• 2.4 Critical success factors for market players
• 2.5 Future Outlook and Strategic Recommendations

Chapter 3 Industry Insights

• 3.1 Industry ecosystem analysis
  • 3.1.1 Supplier Landscape
  • 3.1.2 Profit Margin
  • 3.1.3 Value addition at each stage
  • 3.1.4 Factor affecting the value chain
• 3.2 Industry impact forces
  • 3.2.1 Growth drivers
    • 3.2.1.1 Rising infrastructure development
    • 3.2.1.2 Technological advancements
    • 3.2.1.3 Urbanization and housing demand
  • 3.2.2 Industry pitfalls & challenges
    • 3.2.2.1 Raw material price volatility
    • 3.2.2.2 Complex maintenance requirements
  • 3.2.3 Opportunities
• 3.3 Growth potential analysis
• 3.4 Future market trends
• 3.5 Technology and Innovation Landscape
  • 3.5.1 Current technological trends
  • 3.5.2 Emerging technologies
• 3.6 Price trends
  • 3.6.1 By region
  • 3.6.2 By plant type
• 3.7 Regulatory landscape
  • 3.7.1 Standards and compliance requirements
  • 3.7.2 Regional regulatory frameworks
  • 3.7.3 Certification standards
• 3.8 Trade statistics (HS code -84743110)
  • 3.8.1 Major importing countries
  • 3.8.2 Major exporting countries
• 3.9 Porter's analysis
• 3.10 PESTEL analysis

Chapter 4 Competitive Landscape, 2024

• 4.1 Introduction
• 4.2 Company market share analysis
  • 4.2.1 By region
    • 4.2.1.1 North America
    • 4.2.1.2 Europe
    • 4.2.1.3 Asia Pacific
    • 4.2.1.4 Latin America
    • 4.2.1.5 Middle East and Africa
• 4.3 Company matrix analysis
• 4.4 Competitive analysis of major market players
• 4.5 Competitive positioning matrix
• 4.6 Key developments
  • 4.6.1 Mergers & acquisitions
  • 4.6.2 Partnerships & collaborations
  • 4.6.3 New Product Launches
  • 4.6.4 Expansion Plans

Chapter 5 Market Estimates & Forecast, By Plant Type, 2021 - 2034 ($ Bn, Units)

• 5.1 Key trends
• 5.2 Stationary concrete batching plants
• 5.3 Mobile concrete batching plants

Chapter 6 Market Estimates & Forecast, By Equipment Type, 2021 - 2034 ($ Bn, Units)

• 6.1 Key trends
• 6.2 Concrete mixers
• 6.3 Concrete pumps
• 6.4 Concrete laser screeds
• 6.5 Others

Chapter 7 Market Estimates & Forecast, By Capacity, 2021 - 2034 ($ Bn, Units)

• 7.1 Key trends
• 7.2 Small-capacity plants
• 7.3 Large-capacity plants

Chapter 8 Market Estimates & Forecast, By Automation Level, 2021 - 2034 ($ Bn, Units)

• 8.1 Key trends
• 8.2 Manual
• 8.3 Semi-automatic
• 8.4 Fully automatic

Chapter 9 Market Estimates & Forecast, By Application 2021 - 2034 ($ Bn, Units)

• 9.1 Key trends
• 9.2 Residential construction
• 9.3 Commercial construction
• 9.4 Infrastructure projects

Chapter 10 Market Estimates & Forecast, By End Use 2021 - 2034 ($ Bn, Units)

• 10.1 Key trends
• 10.2 Construction companies
• 10.3 Ready-mix concrete producers
• 10.4 Precast concrete manufacturers
• 10.5 Government organizations

Chapter 11 Market Estimates & Forecast, By Region, 2021 - 2034 ($ Bn, Units)

• 11.1 Key trends
• 11.2 North America
  • 11.2.1 U.S.
  • 11.2.2 Canada
• 11.3 Europe
  • 11.3.1 UK
  • 11.3.2 Germany
  • 11.3.3 France
  • 11.3.4 Italy
  • 11.3.5 Spain
  • 11.3.6 Russia
• 11.4 Asia Pacific
  • 11.4.1 China
  • 11.4.2 India
  • 11.4.3 Japan
  • 11.4.4 Australia
  • 11.4.5 South Korea
• 11.5 Latin America
  • 11.5.1 Brazil
  • 11.5.2 Mexico
• 11.6 MEA
  • 11.6.1 UAE
  • 11.6.2 South Africa
  • 11.6.3 Saudi Arabia

Chapter 12 Company Profiles

• 12.1 Ammann
• 12.2 CON-E-CO
• 12.3 Elkon
• 12.4 Fangyuan
• 12.5 Liebherr
• 12.6 Lintec
• 12.7 McCrory Engineering
• 12.8 Meka
• 12.9 Putzmeister
• 12.10 RexCon
• 12.11 Sany
• 12.12 Janeoo
• 12.13 Schwing Stetter
• 12.14 XCMG
• 12.15 Zoomlion