비절연형 벅 DC-DC 컨버터 시장 : 세계 예측(2026-2032년)

The Non-Isolated Buck DC-DC Converter Market is projected to grow by USD 5.78 billion at a CAGR of 13.83% by 2032.

Non-Isolated Buck DC-DC Converters: Executive Overview

Non-isolated buck DC-DC converters reduce a higher direct-current voltage to a lower regulated output without galvanic isolation. They are widely used in embedded electronics, industrial controls, communications equipment, automotive systems, consumer devices, and energy infrastructure. Their relevance is tied to efficient power delivery, compact board design, accurate voltage regulation, and compatibility with increasingly distributed power architectures.

Power Architecture Is Shifting Toward Higher Efficiency and Integration

System designers are moving toward lower-voltage digital loads, tighter thermal limits, faster transient requirements, and greater power density. These changes favor converter designs with improved switching efficiency, low electromagnetic interference, precise control, and strong thermal performance. Integration of power switches, controllers, protection functions, and telemetry is also reducing component count while increasing the importance of layout, firmware, and system-level validation.

Artificial Intelligence Raises Demands on Distributed Power Delivery

Artificial intelligence is increasing the need for efficient power conversion across data-processing hardware, networking equipment, edge systems, robotics, and smart industrial platforms. AI-enabled equipment commonly combines high-performance processors with numerous lower-voltage subsystems, increasing requirements for dynamic voltage regulation, rapid load-response control, monitoring, and thermal management. AI-assisted design and predictive diagnostics may improve converter selection, simulation, fault detection, and maintenance, but they do not remove the need for electrical qualification and electromagnetic-compatibility testing.

Regional Conditions Shape Adoption and Design Priorities

North America is influenced by data infrastructure, aerospace, automotive electronics, industrial automation, and resilient power-system requirements. Latin America presents opportunities linked to telecommunications, industrial modernization, transportation electrification, and distributed energy systems, with procurement often shaped by import conditions and service availability. Europe emphasizes energy efficiency, product compliance, automotive electrification, industrial control, and sustainability. The Middle East is supported by communications, infrastructure digitization, mobility, and harsh-environment applications, while Africa's priorities include reliable telecommunications, renewable-energy systems, industrial equipment, and serviceability. Asia-Pacific combines extensive electronics manufacturing with strong demand from consumer, automotive, communications, computing, and industrial applications, making production scale, localization, and supply-chain resilience important considerations.

Economic and Security Groups Reveal Different Procurement Priorities

ASEAN combines electronics manufacturing, telecommunications expansion, and industrial growth, creating demand for compact and efficient power architectures. BRICS members span large and diverse industrial bases, with emphasis varying across automotive, energy, communications, automation, and domestic technology capability. The European Union places strong weight on efficiency, environmental compliance, interoperability, and automotive and industrial standards. G7 markets generally prioritize reliability, advanced control, cybersecurity-aware monitoring, and high-performance applications. GCC countries emphasize infrastructure digitization, communications, energy systems, and operation in demanding climates. NATO members commonly require dependable electronics for communications, mobility, aerospace, and defense-related systems, with qualification and supply assurance carrying significant weight.

Country-Level Demand Reflects Distinct Technology Ecosystems

Australia is relevant to mining, communications, renewable energy, and remote infrastructure. Brazil combines automotive, industrial, telecommunications, and energy applications, while Canada has strengths in communications, transportation, industrial technology, and resource operations. China supports broad electronics manufacturing and deployment across consumer, automotive, communications, and industrial systems. France, Germany, Italy, and Spain are shaped by automotive, industrial automation, energy, transportation, and aerospace ecosystems, with Germany particularly focused on industrial efficiency and manufacturing technology. India is advancing electronics production, telecommunications, mobility, and infrastructure digitization. Japan and South Korea maintain sophisticated consumer, automotive, industrial, and semiconductor-linked supply chains. Mexico benefits from electronics and automotive manufacturing integration. Russia's applications include industrial, energy, transportation, and communications equipment, subject to supply-chain and trade constraints. The United Kingdom remains relevant to aerospace, defense, communications, industrial technology, and advanced electronics. The United States combines substantial demand across computing, aerospace, defense, automotive, medical, industrial, and communications systems.

Prioritize Efficiency, Resilience, and Application-Specific Qualification

Industry leaders should segment designs by load profile, voltage range, thermal environment, switching-frequency constraints, and required protection features rather than treating buck conversion as a generic component decision. They should qualify alternatives across efficiency, transient response, electromagnetic compatibility, reliability, and lifecycle support, while designing for component availability and second-source resilience. Advanced monitoring can support predictive maintenance and system optimization, but it should be paired with secure interfaces, clear fault handling, and validated control behavior. Regional compliance requirements, local technical support, and manufacturing continuity should be incorporated early in platform planning.

Research Methodology for the Executive Summary

This executive summary uses the supplied market definition for non-isolated buck DC-DC converters and organizes the assessment around technology drivers, application requirements, regional conditions, economic groupings, country ecosystems, and strategic implications. Insights are framed qualitatively from established engineering, industrial, regulatory, and supply-chain considerations. No market estimates, market shares, forecasts, or company-specific claims are used. Regional, group, and country observations are presented as contextual interpretations rather than quantitative rankings.

Strategic Outlook for Non-Isolated Buck Conversion

Non-isolated buck converters remain a foundational element of modern power management because they connect diverse input rails with the lower-voltage loads used throughout electronic systems. Competitive differentiation is increasingly determined by efficiency across changing loads, transient performance, thermal behavior, integration, observability, qualification, and supply resilience. Leaders that align converter architectures with application requirements and regional compliance conditions will be better positioned to support compact, reliable, and adaptable electronic platforms.

Table of Contents

1. Preface

• 1.1. Objectives of the Study
• 1.2. Market Definition
• 1.3. Market Segmentation & Coverage
• 1.4. Years Considered for the Study
• 1.5. Currency Considered for the Study
• 1.6. Language Considered for the Study
• 1.7. Key Stakeholders

2. Research Methodology

• 2.1. Introduction
• 2.2. Research Design
  • 2.2.1. Primary Research
  • 2.2.2. Secondary Research
• 2.3. Research Framework
  • 2.3.1. Qualitative Analysis
  • 2.3.2. Quantitative Analysis
• 2.4. Market Size Estimation
  • 2.4.1. Top-Down Approach
  • 2.4.2. Bottom-Up Approach
• 2.5. Data Triangulation
• 2.6. Research Outcomes
• 2.7. Research Assumptions
• 2.8. Research Limitations

3. Executive Summary

• 3.1. Introduction
• 3.2. CXO Perspective
• 3.3. New Revenue Opportunities
• 3.4. Next-Generation Business Models
• 3.5. Industry Roadmap

4. Market Overview

• 4.1. Introduction
• 4.2. Industry Ecosystem & Value Chain Analysis
  • 4.2.1. Supply-Side Analysis
  • 4.2.2. Demand-Side Analysis
  • 4.2.3. Stakeholder Analysis
• 4.3. Market Dynamics
  • 4.3.1. Key Drivers
  • 4.3.2. Key Restraints
  • 4.3.3. Key Opportunities
  • 4.3.4. Key Challenges
• 4.4. Porter's Five Forces Analysis
• 4.5. PESTLE Analysis
• 4.6. Market Outlook
  • 4.6.1. Near-Term Market Outlook (0-2 Years)
  • 4.6.2. Medium-Term Market Outlook (3-5 Years)
  • 4.6.3. Long-Term Market Outlook (5-10 Years)
• 4.7. Go-to-Market Strategy

5. Market Insights

• 5.1. Consumer Insights & End-User Perspective
• 5.2. Consumer Experience Benchmarking
• 5.3. Opportunity Mapping
• 5.4. Distribution Channel Analysis
• 5.5. Pricing Trend Analysis
• 5.6. Regulatory Compliance & Standards Framework
• 5.7. ESG & Sustainability Analysis
• 5.8. Disruption & Risk Scenarios
• 5.9. Return on Investment & Cost-Benefit Analysis

6. Cumulative Impact of Artificial Intelligence 2026

7. Non-Isolated Buck DC-DC Converter Market, by Output Current

• 7.1. Introduction
• 7.2. 1-20 A
• 7.3. Less Than 1 A
• 7.4. Greater Than 20 A

8. Non-Isolated Buck DC-DC Converter Market, by Switching Frequency

• 8.1. Introduction
• 8.2. 500 KHz-1 MHz
• 8.3. Less Than 500 KHz
• 8.4. Greater Than 1 MHz

9. Non-Isolated Buck DC-DC Converter Market, by Packaging

• 9.1. Introduction
• 9.2. Module
• 9.3. Surface Mount
  • 9.3.1. BGA
  • 9.3.2. QFN
  • 9.3.3. SOIC
• 9.4. Through Hole

10. Non-Isolated Buck DC-DC Converter Market, by Application

• 10.1. Introduction
• 10.2. Aerospace & Defense
  • 10.2.1. Avionics
  • 10.2.2. Defense Electronics
  • 10.2.3. Satellites
• 10.3. Automotive Electronics
  • 10.3.1. ADAS
  • 10.3.2. Infotainment Systems
  • 10.3.3. Powertrain Control
• 10.4. Consumer Electronics
  • 10.4.1. Laptops
  • 10.4.2. Smartphones
  • 10.4.3. Tablets
  • 10.4.4. Wearable Devices
• 10.5. Healthcare Equipment
  • 10.5.1. Diagnostic Equipment
  • 10.5.2. Medical Imaging
  • 10.5.3. Monitoring Devices
• 10.6. Industrial Machinery
  • 10.6.1. Automation Equipment
  • 10.6.2. Power Tools
  • 10.6.3. Robotics
• 10.7. Server Systems
  • 10.7.1. Blade Servers
  • 10.7.2. Cloud Servers
  • 10.7.3. Enterprise Servers
• 10.8. Telecom Equipment
  • 10.8.1. Data Center
  • 10.8.2. Network Equipment
  • 10.8.3. Wireless Infrastructure

11. Non-Isolated Buck DC-DC Converter Market, by Region

• 11.1. Introduction
• 11.2. Asia-Pacific
• 11.3. North America
• 11.4. Latin America
• 11.5. Europe
• 11.6. Middle East
• 11.7. Africa

12. Non-Isolated Buck DC-DC Converter Market, by Group

• 12.1. Introduction
• 12.2. ASEAN
• 12.3. GCC
• 12.4. European Union
• 12.5. BRICS
• 12.6. G7
• 12.7. NATO

13. Non-Isolated Buck DC-DC Converter Market, by Country

• 13.1. Introduction
• 13.2. United States
• 13.3. Canada
• 13.4. Mexico
• 13.5. Brazil
• 13.6. United Kingdom
• 13.7. Germany
• 13.8. France
• 13.9. Russia
• 13.10. Italy
• 13.11. Spain
• 13.12. China
• 13.13. India
• 13.14. Japan
• 13.15. Australia
• 13.16. South Korea

14. Competitive Landscape

• 14.1. Market Share Analysis, 2025
• 14.2. Market Concentration Analysis, 2025
  • 14.2.1. Concentration Ratio (CR)
  • 14.2.2. Herfindahl Hirschman Index (HHI)
• 14.3. Recent Developments & Impact Analysis, 2025
• 14.4. Product Portfolio Analysis, 2025
• 14.5. Benchmarking Analysis, 2025

15. Company Profiles

• 15.1. ABB Ltd
• 15.2. Analog Devices Inc
• 15.3. Artesyn Embedded Technologies
• 15.4. Bel Fuse Inc
• 15.5. Cosel Co Ltd
• 15.6. CUI Inc
• 15.7. Delta Electronics Inc
• 15.8. Diodes Incorporated
• 15.9. Maxim Integrated Products Inc
• 15.10. Mean Well Enterprises Co Ltd
• 15.11. Microchip Technology Inc
• 15.12. Monolithic Power Systems Inc
• 15.13. Murata Manufacturing Co Ltd
• 15.14. ON Semiconductor Corporation
• 15.15. RECOM Power GmbH
• 15.16. Renesas Electronics Corporation
• 15.17. ROHM Semiconductor
• 15.18. STMicroelectronics N.V.
• 15.19. TDK Corporation
• 15.20. Texas Instruments Incorporated
• 15.21. Traco Power AG
• 15.22. Vicor Corporation
• 15.23. XP Power Ltd

16. Key Experts