자동차용 3D 프린팅 시장 규모, 점유율, 성장 분석 : 제품별, 부품별, 차량 유형별, 재료별, 지역별 - 산업 예측(2024-2031년)

Global Automotive 3D Printing Market size was valued at USD 2.70 billion in 2022 and is poised to grow from USD 3.28 billion in 2023 to USD 15.70 billion by 2031, growing at a CAGR of 21.6% during the forecast period (2024-2031).

The global automotive 3D printing market is experiencing robust growth, propelled by advancements in additive manufacturing technology and its rising adoption within the automotive sector. As the industry intensifies its focus on fuel efficiency and environmental sustainability, 3D printing emerges as a critical tool, enabling the production of lightweight, durable components that enhance vehicle performance while minimizing emissions. This capability is driving automotive manufacturers to incorporate 3D printing into their production workflows, which is further stimulating market expansion. The technology allows designers and engineers to rapidly create and iterate prototypes, significantly accelerating the product development cycle and lowering costs compared to traditional manufacturing methods. Additionally, the increasing accessibility and affordability of 3D printing technology are inspiring automotive enthusiasts and repair shops to produce replacement parts for vintage or rare vehicles, thereby forging new avenues for growth in the automotive aftermarket. This trend is poised to contribute positively to the overall market outlook, highlighting the transformative potential of 3D printing in shaping the future of the automotive industry. With these dynamics at play, the automotive 3D printing market is set to thrive, offering both challenges and opportunities for stakeholders across the value chain.

Top-down and bottom-up approaches were used to estimate and validate the size of the Global Automotive 3D Printing market and to estimate the size of various other dependent submarkets. The research methodology used to estimate the market size includes the following details: The key players in the market were identified through secondary research, and their market shares in the respective regions were determined through primary and secondary research. This entire procedure includes the study of the annual and financial reports of the top market players and extensive interviews for key insights from industry leaders such as CEOs, VPs, directors, and marketing executives. All percentage shares split, and breakdowns were determined using secondary sources and verified through Primary sources. All possible parameters that affect the markets covered in this research study have been accounted for, viewed in extensive detail, verified through primary research, and analyzed to get the final quantitative and qualitative data.

Global Automotive 3D Printing Market Segmental Analysis

Global Automotive 3D Printing Market is segmented by Offering, Component, Vehicle Type, Material, Technology, Application, and region. Based on Offering, the market is segmented into Hardware, and Software. Based on Component, the market is segmented into Interior Components, and Exterior Components. Based on Vehicle Type, the market is segmented into ICE Vehicles, Electric Vehicles. Based on Material, the market is segmented into Metals, Plastics, and Others. Based on Technology, the market is segmented into Stereolithography (SLA), Selective Laser Sintering (SLS), Selective Laser Sintering (SLS), Electron Beam Melting (EBM), Fused Deposition Modeling (FDM), Laminated Object Manufacturing (LOM), Three-dimensional Inject Printing, and Others. Based on Application, the market is segmented into Prototyping and Tooling, Research, Development, and Innovation, Manufacturing Complex Components, and Others. Based on region, the market is segmented into North America, Europe, Asia Pacific, Latin America and Middle East & Africa.

Driver of the Global Automotive 3D Printing Market

The Global Automotive 3D Printing market is significantly driven by the notable cost savings it provides in both prototyping and production processes. Traditional manufacturing methods typically incur high setup expenses, especially for small-scale part production, which can be prohibitive for many manufacturers. However, 3D printing facilitates rapid and on-demand fabrication, eliminating the necessity for costly tooling and molds. This advantage is especially beneficial for producing niche or specialty vehicles with restricted production runs, enabling companies to efficiently develop parts without excessive expenditures. As a result, the transition to 3D printing is becoming increasingly attractive within the automotive industry.

Restraints in the Global Automotive 3D Printing Market

The Global Automotive 3D Printing market faces significant restraints, particularly regarding intellectual property issues. The simplicity and accessibility of 3D printing technology raise concerns about potential IP infringements, as digital design files can be easily shared and replicated without authorization. This not only heightens the risk of unauthorized manufacturing of patented automotive components but also complicates efforts to safeguard the intellectual property rights of automakers and their suppliers. As a result, the industry must navigate these challenges to ensure that innovation is protected while still leveraging the benefits of 3D printing technology in automotive applications.

Market Trends of the Global Automotive 3D Printing Market

The global automotive 3D printing market is witnessing significant growth as additive manufacturing technology transforms traditional automotive practices. This trend is propelled by the industry's urgent need for innovation, cost efficiency, and enhanced performance in vehicle design and production. With 3D printing enabling the fabrication of intricate geometries, lightweight parts, and tailored components while minimizing material waste, automotive companies are increasingly adopting this technology. The capability for rapid prototyping accelerates the development cycle, allowing manufacturers to bring new models and components to market more swiftly. As sustainability becomes a focal point, the shift towards 3D printing is anticipated to reshape the automotive landscape significantly over the coming years.

Table of Contents

Introduction

• Objectives of the Study
• Scope of the Report
• Definitions

Research Methodology

• Information Procurement
• Secondary & Primary Data Methods
• Market Size Estimation
• Market Assumptions & Limitations

Executive Summary

• Global Market Outlook
• Supply & Demand Trend Analysis
• Segmental Opportunity Analysis

Market Dynamics & Outlook

• Market Overview
• Market Size
• Market Dynamics
  • Driver & Opportunities
  • Restraints & Challenges
• Porters Analysis & Impact
  • Competitive rivalry
  • Threat of substitute
  • Bargaining power of buyers
  • Threat of new entrants
  • Bargaining power of suppliers

Key Market Insights

• Key Success Factors
• Degree of Competition
• Top Investment Pockets
• Market Ecosystem
• Technological Advancement
• Regulatory Landscape
• Patent Analysis
• Value Chain Analysis
• Case Study Analysis
• PESTEL Analysis
• Macro-Economic Indicators
• Market Attractiveness Index

Global Automotive 3D Printing Market Size by Offering & CAGR (2024-2031)

• Market Overview
• Hardware
• Software

Global Automotive 3D Printing Market Size by Component & CAGR (2024-2031)

• Market Overview
• Interior Components
• Exterior Components

Global Automotive 3D Printing Market Size by Vehicle Type & CAGR (2024-2031)

• Market Overview
• ICE Vehicles
• Electric Vehicles

Global Automotive 3D Printing Market Size by Material & CAGR (2024-2031)

• Market Overview
• Metals
  • Stainless Steel
  • Titanium
  • Aluminum
  • Metal Alloys
• Plastics
  • Acrylonitrile Butadiene Styrene (ABS)
  • Polylactic Acid (PLA)
  • Nylon
  • Resin & Composites
• Others

Global Automotive 3D Printing Market Size by Technology & CAGR (2024-2031)

• Market Overview
• Stereolithography (SLA)
• Selective Laser Sintering (SLS)
• Selective Laser Sintering (SLS)
• Electron Beam Melting (EBM)
• Fused Deposition Modeling (FDM)
• Laminated Object Manufacturing (LOM)
• Three-dimensional Inject Printing
• Others

Global Automotive 3D Printing Market Size by Application & CAGR (2024-2031)

• Market Overview
• Prototyping and Tooling
• Research, Development, and Innovation
• Manufacturing Complex Components
• Others

Global Automotive 3D Printing Market Size & CAGR (2024-2031)

• North America, (Offering, Component, Vehicle Type, Material, Technology, Application)
  • US
  • Canada
• Europe, (Offering, Component, Vehicle Type, Material, Technology, Application)
  • UK
  • Germany
  • Spain
  • France
  • Italy
  • Rest of Europe
• Asia-Pacific, (Offering, Component, Vehicle Type, Material, Technology, Application)
  • China
  • India
  • Japan
  • South Korea
  • Rest of Asia Pacific
• Latin America, (Offering, Component, Vehicle Type, Material, Technology, Application)
  • Brazil
  • Rest of Latin America
• Middle East & Africa, (Offering, Component, Vehicle Type, Material, Technology, Application)
  • GCC Countries
  • South Africa
  • Rest of Middle East & Africa

Competitive Intelligence

• Top 5 Player Comparison
• Market Positioning of Key Players, 2023
• Strategies Adopted by Key Market Players
• Recent Developments in the Market
• Company Market Share Analysis, 2023
• Company Profiles of All Key Players
  • Company Details
  • Product Portfolio Analysis
  • Company's Segmental Share Analysis
  • Revenue Y-O-Y Comparison (2021-2023)

Key Company Profiles

• 3D Systems
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Renishaw PLC
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• HP Inc
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Materialise
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Voxeljet
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Ultimaker
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Carbon
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Farsoon Technologies
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Nexa3D
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Eplus3D
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Protolabs
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• SLM Solutions Group AG
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Sinterit
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments

Conclusion & Recommendation