자동차용 주행중 중량 측정 시장 규모, 점유율, 성장 분석 : 센서 유형별, 차축 구성별, 데이터 인터페이스별, 용도별, 최종 용도별, 지역별 - 업계 예측(2026-2033년)

Global Automotive Weigh In Motion Market size was valued at USD 1.6 Billion in 2024 and is poised to grow from USD 1.7 Billion in 2025 to USD 2.84 Billion by 2033, growing at a CAGR of 6.6% during the forecast period (2026-2033).

The global automotive weigh-in-motion market is experiencing significant growth driven by the expanding logistics and transportation sectors. There is an increasing demand for advanced solutions that facilitate vehicle weighing while in motion, ensuring compliance with road safety regulations. These systems enhance operational efficiency by allowing authorities to monitor vehicle weight without halting traffic, thereby mitigating road congestion caused by stationary checks. Enhanced enforcement of weight regulations is crucial to prevent accidents linked to overloaded trucks, further propelling market growth. Additionally, the integration of advanced analytics and sensors is improving the precision of weigh-in-motion solutions. A heightened focus on sustainability, infrastructure preservation, and traffic management will also play a vital role in shaping the automotive weigh-in-motion landscape in the foreseeable future.

Top-down and bottom-up approaches were used to estimate and validate the size of the Global Automotive Weigh In Motion market and to estimate the size of various other dependent submarkets. The research methodology used to estimate the market size includes the following details: The key players in the market were identified through secondary research, and their market shares in the respective regions were determined through primary and secondary research. This entire procedure includes the study of the annual and financial reports of the top market players and extensive interviews for key insights from industry leaders such as CEOs, VPs, directors, and marketing executives. All percentage shares split, and breakdowns were determined using secondary sources and verified through Primary sources. All possible parameters that affect the markets covered in this research study have been accounted for, viewed in extensive detail, verified through primary research, and analyzed to get the final quantitative and qualitative data.

Global Automotive Weigh In Motion Market Segments Analysis

Global Automotive Weigh In Motion Market is segmented by Sensor Type, Axle Configuration, Data Interface, Application, End Use and region. Based on Sensor Type, the market is segmented into Piezoelectric Sensors, Strain-Gauge-Based Sensors, Load Cells and Bending Plate Sensors. Based on Axle Configuration, the market is segmented into Single Axle, Tandem Axle, Triple Axle and Quad Axle. Based on Data Interface, the market is segmented into Analog, Digital and Wireless. Based on Application, the market is segmented into Traffic Enforcement, Overload Detection, Vehicle Classification and Tolling. Based on End Use, the market is segmented into Government, Transportation and Private Sector. Based on region, the market is segmented into North America, Europe, Asia Pacific, Latin America and Middle East & Africa.

Driver of the Global Automotive Weigh In Motion Market

The rising frequency of road accidents has prompted the establishment of stringent road safety regulations, significantly boosting the demand for automotive weigh in motion systems. Additionally, the growing emphasis by governments on infrastructure preservation is expected to further enhance the growth prospects of the automotive weigh in motion market. These factors collectively underline the increasing need for innovative solutions that ensure road safety and infrastructure longevity, driving the demand for advanced weigh-in-motion technology in the automotive sector. As concerns about road safety and infrastructure maintenance continue to escalate, the market for these systems is poised for expansion.

Restraints in the Global Automotive Weigh In Motion Market

The Global Automotive Weigh In Motion market faces significant challenges related to the regular calibration and maintenance required for these systems to function accurately. This necessity not only incurs additional costs for users but also leads to potential downtimes that can adversely affect operations and result in financial losses. As such, addressing the issues of maintenance, calibration, and operational downtime is crucial for optimizing the effectiveness and reliability of weigh-in-motion systems within the automotive industry. Users must navigate these complexities to harness the full benefits of such technology, which is vital for efficient logistics and vehicle weight management.

Market Trends of the Global Automotive Weigh In Motion Market

The Global Automotive Weigh In Motion market is witnessing a significant trend towards the integration of advanced sensor technology. Innovations such as laser scanners and high-resolution cameras are being increasingly utilized to enhance the efficiency and accuracy of weigh in motion systems. These advancements not only streamline data collection but also improve the reliability of weight measurements in real-time traffic conditions. As stakeholders recognize the value of precise data for transportation planning, enforcement activities, and infrastructure maintenance, the demand for sophisticated weigh in motion solutions is expected to grow, presenting lucrative opportunities for market players to capitalize on technological advancements.

Table of Contents

Introduction

• Objectives of the Study
• Scope of the Report
• Definitions

Research Methodology

• Information Procurement
• Secondary & Primary Data Methods
• Market Size Estimation
• Market Assumptions & Limitations

Executive Summary

• Global Market Outlook
• Supply & Demand Trend Analysis
• Segmental Opportunity Analysis

Market Dynamics & Outlook

• Market Overview
• Market Size
• Market Dynamics
  • Drivers & Opportunities
  • Restraints & Challenges
• Porters Analysis
  • Competitive rivalry
  • Threat of substitute
  • Bargaining power of buyers
  • Threat of new entrants
  • Bargaining power of suppliers

Key Market Insights

• Key Success Factors
• Degree of Competition
• Top Investment Pockets
• Market Ecosystem
• Market Attractiveness Index, 2025
• PESTEL Analysis
• Macro-Economic Indicators
• Value Chain Analysis
• Pricing Analysis
• Case Studies

Global Automotive Weigh In Motion Market Size by Sensor Type & CAGR (2026-2033)

• Market Overview
• Piezoelectric Sensors
• Strain-Gauge-Based Sensors
• Load Cells
• Bending Plate Sensors

Global Automotive Weigh In Motion Market Size by Axle Configuration & CAGR (2026-2033)

• Market Overview
• Single Axle
• Tandem Axle
• Triple Axle
• Quad Axle

Global Automotive Weigh In Motion Market Size by Data Interface & CAGR (2026-2033)

• Market Overview
• Analog
• Digital
• Wireless

Global Automotive Weigh In Motion Market Size by Application & CAGR (2026-2033)

• Market Overview
• Traffic Enforcement
• Overload Detection
• Vehicle Classification
• Tolling

Global Automotive Weigh In Motion Market Size by End Use & CAGR (2026-2033)

• Market Overview
• Government
• Transportation
• Private Sector

Global Automotive Weigh In Motion Market Size & CAGR (2026-2033)

• North America (Sensor Type, Axle Configuration, Data Interface, Application, End Use)
  • US
  • Canada
• Europe (Sensor Type, Axle Configuration, Data Interface, Application, End Use)
  • Germany
  • Spain
  • France
  • UK
  • Italy
  • Rest of Europe
• Asia Pacific (Sensor Type, Axle Configuration, Data Interface, Application, End Use)
  • China
  • India
  • Japan
  • South Korea
  • Rest of Asia-Pacific
• Latin America (Sensor Type, Axle Configuration, Data Interface, Application, End Use)
  • Brazil
  • Rest of Latin America
• Middle East & Africa (Sensor Type, Axle Configuration, Data Interface, Application, End Use)
  • GCC Countries
  • South Africa
  • Rest of Middle East & Africa

Competitive Intelligence

• Top 5 Player Comparison
• Market Positioning of Key Players, 2025
• Strategies Adopted by Key Market Players
• Recent Developments in the Market
• Company Market Share Analysis, 2025
• Company Profiles of All Key Players
  • Company Details
  • Product Portfolio Analysis
  • Company's Segmental Share Analysis
  • Revenue Y-O-Y Comparison (2023-2025)

Key Company Profiles

• Sensys Gatso Group (Sweden)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Highway Information Systems, Inc. (US)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Mettler Toledo (US)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• TE Connectivity Ltd. (Switzerland)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Kistler Group (Switzerland)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Synercon Technologies (US)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• EFKON AG (Austria)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• EYE-TRONICS (US)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Trakblaze Pty. Ltd. (Australia)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• STRATONICS (US)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Roadmetric (Israel)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Intercomp Company (US)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments
• Key Solutions S.r.l. (Italy)
  • Company Overview
  • Business Segment Overview
  • Financial Updates
  • Key Developments

Conclusion & Recommendations